GHK DOMO locker boxes stand for safety and high-quality workmanship
A locker box is constructed with 13 mm HPL compact sheets coated with melamin resin. They provide a maximum of stability and safety thus meeting highest demands on high-quality and safe locker boxes. Because of the modular and therefore flexible construction you can determine the size, colour and equipment of your locker boxes. Due to their coating the finish is not only waterproof, but also impact and scratch proof, therefore designed for daily heavy-duty service. Corners and edges are rounded and accident-proof and the inner locking box is low-noise thanks to a plastic door buffer. Each box has a plastic number plate in aluminium look, but you can also have the engraving directly on the door.
Your guests‘ valuables shouldn’t be kept in the normal lockers, but deposited in extra locker boxes under the eyes of your control staff. As in most cases this means the immediate swimming area, these locker boxes must be constructed of wet room proof material. DOMO locker boxes model WKV are the ideal solution to the problem. Body and door consist completely of HPL compact sheets. The locker columns are screwed together from blocks of 1-7 compartments to rows of any length.
The door is 13 mm strong and fitted with 2 concealed stainless steel hinges bolted on the inside.
The measurement of the compartments is: on the outside 200 mm wide and high, 250 mm deep.
Shelves, side and back panels are preassembled to a locker box unit at the factory. Single locker box units can be combined to locker box sets.
Side panels, partitions and shelves made of 13 mm waterproof HPL compact sheet according to DIN EN 438. Surface is melamin resin-coated. Colour according to DOMO colour chart. Visible edges rounded and accident-proof.
13 mm HPL compact sheet according to DIN EN 438 with black edge. Surface melamin resin-coated, colour according to DOMO colour chart. Edges and corners rounded and accident-proof.
Doors DIN right-hinged, 2 hinges made of stainless steel mounted on the inside, no visible screws on the outside. Interior lock case made of plastic with plastic door buffer for noise reduction. Each door is fitted with a plastic number plate in aluminium design with engraved compartment number.
Direct engravings are possible at additional cost. Each door is prepared for a lock of your choice (door lock rf. TB 334).
The locker boxes are mounted invisibly by means of an aluminium support profile fastened to massive walls with dowels.
Attention: For the proper mounting of locker boxes on plasterboard walls you need adequate inner reinforcing where the boxes are screwed on. We tell you the measurements. For the mounting on DOMO walls you need a compression fitting. For non-massive walls such as gas concrete, honeycomb bricks you need special fastenings.
grid width 200 mm
grid height 200 mm
depth outside 260 mm
Compartment size inside
grid width -13 = 187 mm
grid height -13 = 187 mm
depth outside = 227 mm
Subject to technical changes.
WKV charging station
WKV charging station
Be it in a shopping mall, at a fair, a campsite or any other public place – the guest’s residence time is an economical factor. At the same time, the mobile connection to the world at short battery life is indispensable. Our clients have pointed out this trend to us and we have developed the WKV charging station.
Safe charging of mobile phone and laptop
- Locker box with 6 compartments and 230V power plug for the socket
- Standard size width/height/depth 892x359x460mm
- Standard size per compartment interior width/height/depth 280x160x380mm
- Equipped with 2 sockets 230V or 2 USB connections each
- Cylinder latch or coin deposit locks
- Suspended mounting
- Variations on demand.