Sanitary cabins – used by everybody!
GHK DOMO’s sanitary cubicles are made for all purposes and premises. Differently constructed models are designed for conditions in dry as well as in wet rooms. Doors, walls, fittings and equipment are coordinated to their various uses as toilet, shower and changing cubicles in public, non-profit and private and private institutions.
Constant hard wear requires materials of high quality and resilience, sanitary rooms which are easy to handle and to clean – alle characteristics united in GHK DOMO’s sanitary cubicles.
The System
Notches for front-end installation, exposed pipes, protruding window sills, reveals etc. found at final measurements or assembly are charged additionally.
Our model KA is designed for normal use in dry rooms. For damp and wet rooms and if floors and walls are usually cleaned by hosing them off with running water, we recommend our models in HPL compact.
Special heights are available:
No. 83 facility height 2160 mm including 150 mm ground clearance.
No. 84 facility height 2010 mm without ground clearance.
Subject to technical changes.
2010 mm, 150 mm ground clearance included.
30 mm chipboard with melamin resin coated surface according to colour chart, visible edges unsized, surface largely scratch and impact resistant, acid and alkali resistant.
aluminium profiles anodized in natural colour or powder-coated in white RAL 9010.
Legs anodized in natural colour.
Circulating with grey ABS-edge, driving bluntly into aluminium profiles of front walls, with inlaid soft seal at the closing side for acoustic insulation and dead lock.
Cubicle doors at nominal 550 or 625 mm, clearance 55 mm smaller.
Anteroom doors at nominal 750 mm, clearance 695 mm.
550 and 625 mm doors with 2 Rising Hinges and 180 degree aperture angle, for opening and closing the door, adjustable to different angles, 750, 900 and 1000 mm doors with 3 Rising Hinges at additional cost.
one-piece up to 1600 mm width, more than 1600 mm two pieces with joining profile and cover profile at the top; one-piece partitions 19 mm shorter than front and side walls, connected to front with aluminium profile.
DOMO polyamid fittings in black, white, red or grey, door knob fitting vacant/occupied no. 51 (on the outside doorknob with big red/white disc behind Plexiglas and emergency unlocking hexagon socket for SW 4, on the inside milled turning knob with white direction indicator) or PZ-pierced no. 54 (non-turning knob on both sides with piercing for 80 mm cylinder).
For anteroom doors we deliver non-turning doorknob fitting no. 56, not lockable, or knob fitting no. 54 PZ-pierced at additional cost.
Also available at additional cost: doorknob fittings DOMO Design made of aluminium anodized in natural colour or door handle.
Each cubicle door can be equipped with one polyamid coat hook no. 183 in the colour of the fittings or in stainless steel at additional cost, which also functions as a stop for inwards opening door.
Adjustable screw-on legs made of 18 mm aluminium tube anodized in natural colour with cover rosette, set into front wall. If desired and at additional cost: legs made of 18 mm brushed stainless steel with stainless steel cover rosette.
Aluminum profile, also functioning for evening out construction tolerances. At additional cost: slanting wall connection.
Continuous stiffening of front by means of aluminium-C-profile, screwed to front walls, in the area of doors and passages covered by light metal profile.
At additional cost we also deliver a rounded beautifully formed and strong-walled hollow-chamber aluminium head profile 75/40.
The System
Our model KA30 Plus is designed for normal use in dry rooms. For damp and wet rooms and if floors and walls are usually cleaned by hosing them off with running water, we recommend our models in HPL compact.
2010 mm, 150 mm ground clearance included
30 mm solid chipboard with melamin resin coated surface according to DOMO colour chart, visible edges unsized, surface largely scratch and impact resistant, acid and alkali resistant.
Rounded multi-chamber hollow aluminium head profile 75 x 40 mm made of aluminium anodized in natural colour over front and side panels.
Aluminium profiles and legs anodized in natural colour, powder-coated on demand.
Circulating with grey ABS-edge, driving bluntly into aluminium profiles of front walls, with inlaid soft seal at the closing side for acoustic insulation and DOMO-Conic aluminium one-hand fitting.
Cubicle doors at nominal 550 or 625 mm, clearance 55 mm smaller.
Anteroom doors at nominal 750 mm, clearance 695 mm.
550 and 625 mm doors with 2 Rising Hinges and 180 degree aperture angle, for opening and closing the door, adjustable to different angles, 750, 900 and 1000 mm doors with 3 Rising Hinges.
one-piece up to 1600 mm width, more than 1600 mm two pieces with joining profile. Partitions 19 mm shorter than front and side walls, connected to front with aluminium profile.
DOMO-Conic one-hand fitting vacant/occupied no. 51 in aluminium anodized in natural colour, (on the outside doorknob with big red/white disc behind Plexiglas and emergency unlocking hexagon socket for SW 4, on the inside one-hand turning knob with direction indicator for direct locking of the door) or bathroom rosette fitting with door handle, made of aluminium or stainless steel, as desired.
Each cubicle door can be equipped with one coat hook no. 183 made of either polyamid, aluminium or stainless steel, which also functions as a stop for inwards opening door.
Adjustable stainless steel screw-on legs, 18 mm aluminium tube anodized in natural colour with cover rosette in stainless steel, set into front wall.
Continuous stiffening of front by means of aluminium hollow-chamber head profile, screwed to front walls, in the area of doors and passages covered by light metal profile.
